Projects
There are 19 results.
AGreeNew - New biobased products of the agricultural biorefinery
AGreeNew aims to expand the product portfolio of the agricultural biorefinery. Sour whey, farm manure and green silage will be used as raw materials to produce biosurfactants, fertilizers and protein-rich animal feed. The production processes of these valuable products will be assessed in terms of sustainability and economic potential.
BuildReUse ‐ 100 percent re‐use and recycling in buildings with short usage cycles
Some buildings, such as supermarkets or office buildings, are often demolished and rebuilt after a few years or at least have their interiors changed, turning large quantities of building components into waste. The BuildReUse project aims to develop circular economy concepts for these buildings and to promote the necessary change in the construction industry.
CEPAM – Circular Economy Powder for Additive Manufacturing
In the CEPAM research project, a recycling process for high-quality metal powders for additive manufacturing is developed. Various methods of energy input are being evaluated for energy efficiency, scalability and powder quality and built up on a pilot scale. The recycled metal powder is characterized and processed in the Laser Powder Bed Fusion process. In order to compare the mechanical properties of the printed components, parts are printed from both new and recycled powder.
CICA - Chlorella in circular aquaculture
Project CICA allows the detailed investigation of fish wastewater and its treatment by algae cultivation, as well as the design and construction of a special photobioreactor to purify wastewater and produce fish at the same time.
CircuPack - Recyclable materials for food packaging with a low ecological footprint
The goal of the project is to develop sustainable and environmentally friendly food packaging with an improved ecological footprint. It is important to develop a new process control that ensures both food compatibility and the sustainability of the resulting product.
CircularBioMat – Recyclable biogenic materials for building installations and supply equipment
As part of CircularBioMat, numerous bio‐based materials – including bio‐polymers reinforced with natural fibers as well as recycled materials – are being tested for their suitability as a replacement for the petroleum‐based polymers that dominate technical building installations (TGA) and supply equipment.
CircularFood - High-quality products through cascading recycling cycles of residual materials from the food industry
The CircularFood project investigates the material and energetic cascading use of organic food residues from Austrian food production. The aim is to develop innovative processes for the extraction of high-quality protein components, liquid biofertilizers, organic plant substrates and peat substitutes in order to promote the circular economy and reduce CO2 emissions.
DigiTech4CE - Digital key technologies for circular production
DigitTech4CE analysed industrial cycles in discrete, digitalised production; their participants, advantages/disadvantages and framework conditions, as well as the key digital technologies required. Fields of action were developed, according to the needs of Austrian industry. Recommendations for action serve the development of sustainable, Austrian production that builds and expands competitiveness through circular innovations.
Earth movement: Clay - a climate- and resource-friendly building material
Manufacturing processes and transport of building materials are energy-intensive and cause high CO2emissions. In addition, many building materials pose a health and disposal problem due to their content of disruptive and harmful substances. Locally available clay can replace conventional materials if appropriately prepared and processed, and helps to save both manufacturing processes and transport routes.
EdeN - Efficient decentralized sustainable food production
In the EdeN project, a decentralized vertical farming concept is extended to meet circular economy requirements. The combination of vertical farming with closed energy-, resource- and distribution-loops is a possible disruptive concept in food production. The developed concepts will be accessible and transferable to other food producers, and its limitations will be pointed out.
Hemp Ski, Recyclable ski manufacturing from hemp, bio-resin and waste streams
In industrial production for alpine skis, epoxy resins of fossil origin and pre-impregnated glass fiber reinforcements are processed today. Innovations that replace environmentally critical materials in skis with biogenic substitute materials with an improved environmental balance have so far been limited to the production of small series. This circumstance motivated the consortium to develop a solution for a circular bioeconomy with the HempSki project, which will also make industrial ski production from renewable raw materials and waste streams possible in the future.
KAFKA - Development of cascade reactions for a circular economy
KAFKA aims to expedite the development of biorefinery processes and showcase the potential of process cascades for producing high-quality chemical products from biogenic resources/waste. The central element of the project is an innovative reactor platform that flexibly combines biotechnological, electrochemical, and thermal processes. Investigations into new process cascades to enable a circular economy are thereby accelerated.
LightCycle
Fiber-reinforced thermoplastic composite components with low weight, so-called lightweight components for transport and mobility, lead to significant CO2 savings. Despite established production technologies and weight savings, further progress in lightweight construction is increasingly difficult because the sustainability of these products is currently not given due to the unresolved recycling problem, although the regulations require, among other things, 85 % recycling of an end-of-life vehicle.
NNATT - Sustainable use of excavated materials from civil engineering and tunnelling using sensor-based technologies
The holistic system developed in the NNATT project for the sustainable utilisation of excavated materials starts with the geology and extends through the construction process to recycling. With the help of sensor-based real-time analyses and an AI-supported decision matrix, excavated materials are separated and further developed into customised products.
NaKaReMa - Improving the sustainability of cable sheathing through regional, bio-based and recycled materials
The NaKaReMa project takes a holistic approach to cable sheathing for automotive applications and their improvement in terms of sustainability. To this end, various approaches are being investigated - both regional raw material sources to reduce transport routes and bio-based raw materials to reduce dependence on crude oil. The use of recyclates from cable sheathing to close the cycle through recycling is also being investigated.
QB3R – Quality controlled high‐performance components consisting of 100% bio‐based resins with high potential in repair and recycling
The QB3R project aims to develop an epoxy resin system having a 100% bio‐based carbon content. The QB3R resin will be processable with various different manufacturing techniques resulting in high performance components for long‐lasting material goods.
RE-FORM earth - Earth Building for Building Sector Transformation
In order to promote the use of earth, the RE-FORM earth project is creating a planning basis for the construction of structures and buildings containing earth. In order to counter uncertainties regarding the health effects of earth building materials, a comprehensive program is being carried out to investigate radiation exposure and potential pollutants in earth. By erecting a temperature-controlled rammed earth wall in a test room with subsequent measurements, the aim is to determine the extent to which the material can contribute to healthy indoor air due to its moisture-regulating properties and help to balance out energy peaks.
ReKEP
ReKEP relies on reusable transport containers instead of (disposable) cardboard packaging. These should be affordable, effective and flexible to use in the CEP sector (courier, express, parcel). The logistics processes involved are examined and adjustments are proposed to achieve economic, ecological and social sustainability.
UPTextIL - Upcycling cellulose from used textiles into high-strength filaments using spinning technology in ionic liquids
The aim of the project is to develop a process for spinning cellulose from used textiles using ionic liquids, to analyze potential impurities in this recycling material stream, and to develop strategies for their removal or avoidance during the spinning process. The project aims to lay the foundations for closing the material cycle of cellulose from used textiles.