Projects
There are 54 results.
ReNew PV - Coating to increase the service life of PV modules with damaged backsheets
The ReNew PV project focuses on the development of lifetime-extending coating solutions for the backsheets of PV modules. The focus is on a protective coating to restore the electrical resistance and on the repair of cracked or mechanically damaged backsheets.
ReTarget - Re-manufacturing and re-purposing of high-quality sputter materials
The project objective is to reduce the energy input in the production of sputtering targets by at least 20 % by direct re-manufacturing of used, precious metal targets. In addition, the utilization rate will be increased from an average of 20-30 % to 70-80 % through a direct re-purpose approach, as well as by optimizing the sputtering process. This will allow a significant reduction of the footprint of the sputtering process.
Recommendations for funding criteria to promote system benefits for medium and large battery storage systems
Market analysis and stakeholder process
Repair initiatives in Europe: innovations, business models, recommendations. Experiences from the PREPARE network
The European Union and many countries in Europe have begun to take individual measures to-wards “increasing the repair rate” here and there. With the help of surveys and interviews, which were carried out with the support of contacts provided by the “PREPARE” network, which has ex-isted for almost 30 years, this work collects information about such measures in other European countries - especially regarding “best practice examples” and “lessons learned” – and analyzes their transferability to Austria.
Road-to-Road/ Verschränkung neuartiger Methoden zur effizienten „Road-to-Road“ Inwertsetzung von Altasphalt
The planned combination of experimental and model-based methods for assessing/describing the behavior of asphalt shall enable the goal-oriented optimization of the performance/durability of recycled asphalt, with the resulting positive effects (CO2 balance, transport distances, landfill volume) being quantified within the project.
SHyRE - Sulfuric acid and hydrogen production for the electronics industry through innovative recycling
In SHyRE, an innovative process for sulfuric acid recycling is being developed. The aim is to efficiently produce high-purity sulfuric acid and hydrogen by combining novel decomposition processes with electrochemical methods.
Scenarios for the Biobased Industry in Austria
In order to support the implementation of the Austrian Bioeconomy Strategy, three scenarios for the bio-based industry in Austria were developed. The present study is intended to serve as a solid overview and as a starting point for further detailed studies by other researchers.
Secondary Materials in the Austrian Textile Industry - Study with Recommendations for the Austrian R&D-Politics
This study deals with the challenges and potentials for the use of secondary materials in the Austrian textile industry. It identifies challenges and potentials for establishing cycles in the textile industry with a focus on the use of secondary materials in Austria based on broad stakeholder involvement. Based on this, recommendations for research and development activities were formulated to promote recycling.
Secondary Phosphorus as Raw Material for the Chemical Industry
Recycling of Phosphorus as Contribution to the Security of Supply of Bioeconomy
StraTex ‐ Sorting and processing strategies for used textiles to produce recyclable fractions
In StraTex, suitable, economically viable and holistic strategies for the collection, processing and automated sorting of mixed non‐reusable textiles are being developed and experimentally implemented in order to increase the proportion of marketable fractions for high‐quality material recycling (preferably fibre2fibre).
UPTextIL - Upcycling cellulose from used textiles into high-strength filaments using spinning technology in ionic liquids
The aim of the project is to develop a process for spinning cellulose from used textiles using ionic liquids, to analyze potential impurities in this recycling material stream, and to develop strategies for their removal or avoidance during the spinning process. The project aims to lay the foundations for closing the material cycle of cellulose from used textiles.
Wastewater cycle. Cascadic recycling of wastewater and organic residue streams in buildings.
Basic research is being conducted for a sustainable cycle-oriented system for the building-integrated recycling of wastewater and food waste. This includes nutrient recovery for a sustainable circulation system (production of plant fertiliser and biochar), electricity production to meet the demand (up to 15 %) of plus-energy buildings, as well as water recovery for irrigation of the building's own or urban greenery and for summer cooling.
circPLAST‐mr Mechanical Recycling of Plastics: Mechanisches Recycling von Kunststoffen: From waste plastics to high‐quality and specification‐compliant recyclates
The flagship project circPLAST‐mr pursues the following 4 main objectives: (1) to identify and explore previously unused potential for mechanical plastics recycling, (2) to define and test key process steps for this on a laboratory/pilot scale, (3) to demonstrate the eco‐efficient marketability of increased recycled plastic volumes, and (4) to demonstrate the scalability of the laboratory/pilot process steps to industrial scale.
rPS4FoodPackaging - Polystyrene Recycling for food contact applications
The production of recycled plastics for food contact applications is challenging. Besides recycled polyethylene terephthalate (rPET) for beverage bottles, there are few alternatives in recycled plastics. This project focuses on researching a novel recycling process for polystyrene, aiming for approval of recycled polystyrene (rPS) for food contact applications.