Projects
There are 54 results.
ReNew PV - Coating to increase the service life of PV modules with damaged backsheets
The ReNew PV project focuses on the development of lifetime-extending coating solutions for the backsheets of PV modules. The focus is on a protective coating to restore the electrical resistance and on the repair of cracked or mechanically damaged backsheets.
ReTarget - Re-manufacturing and re-purposing of high-quality sputter materials
The project objective is to reduce the energy input in the production of sputtering targets by at least 20 % by direct re-manufacturing of used, precious metal targets. In addition, the utilization rate will be increased from an average of 20-30 % to 70-80 % through a direct re-purpose approach, as well as by optimizing the sputtering process. This will allow a significant reduction of the footprint of the sputtering process.
Road-to-Road/ Verschränkung neuartiger Methoden zur effizienten „Road-to-Road“ Inwertsetzung von Altasphalt
The planned combination of experimental and model-based methods for assessing/describing the behavior of asphalt shall enable the goal-oriented optimization of the performance/durability of recycled asphalt, with the resulting positive effects (CO2 balance, transport distances, landfill volume) being quantified within the project.
SHyRE - Sulfuric acid and hydrogen production for the electronics industry through innovative recycling
In SHyRE, an innovative process for sulfuric acid recycling is being developed. The aim is to efficiently produce high-purity sulfuric acid and hydrogen by combining novel decomposition processes with electrochemical methods.
SLEEVE – Packaging and process optimisation of plastic packaging with sleeves
Development and design of selected and recyclable plastic packaging with sleeves that can be sorted and processed into high-quality recyclates. All the factors along the value chain are considered (design, consumer behaviour, sorting, recycling) in order to optimise the product cycle in the best possible way and maximise recyclate quantities and qualities.
StraTex ‐ Sorting and processing strategies for used textiles to produce recyclable fractions
In StraTex, suitable, economically viable and holistic strategies for the collection, processing and automated sorting of mixed non‐reusable textiles are being developed and experimentally implemented in order to increase the proportion of marketable fractions for high‐quality material recycling (preferably fibre2fibre).
Sustainable catalyst-coated electrodes for efficient AEM electrolyser production (SAEP)
The SAEP project focuses on the development of anion exchange membrane electrolyzers (AEMEL) for the cost-effective production of green hydrogen through the development of catalysts without platinum group metals. Led by TU Graz, Joanneum Research, and Duramea, the project focuses on roll-to-roll scalable electrode manufacturing with enhanced performance and durability. Innovative pre-/post-treatment and energy-efficient drying methods ensure defect-free, corrosion-resistant electrodes. A life cycle analysis integrates circular economy principles to optimize resource efficiency and minimize waste, fostering sustainable and high-performance AEMEL electrode production in Austria.
UPTextIL - Upcycling cellulose from used textiles into high-strength filaments using spinning technology in ionic liquids
The aim of the project is to develop a process for spinning cellulose from used textiles using ionic liquids, to analyze potential impurities in this recycling material stream, and to develop strategies for their removal or avoidance during the spinning process. The project aims to lay the foundations for closing the material cycle of cellulose from used textiles.
V-Form – Manufacturing unreinforced vaulted concrete floors with variable pneumatic formworks
V-Form is working on the development of vaulted concrete floors in terms of structural design and building physics, as well as on a new formwork system. Thanks to the efficient shell construction, around 70% CO2eq-emissions can be saved compared to reinforced concrete flat slabs. The reusable and variable pneumatic formwork system aims to enable the economical production of the double-curved concrete shells.
Wastewater cycle. Cascadic recycling of wastewater and organic residue streams in buildings.
Basic research is being conducted for a sustainable cycle-oriented system for the building-integrated recycling of wastewater and food waste. This includes nutrient recovery for a sustainable circulation system (production of plant fertiliser and biochar), electricity production to meet the demand (up to 15 %) of plus-energy buildings, as well as water recovery for irrigation of the building's own or urban greenery and for summer cooling.
WattsOK? Robotics and AI Enabled Reuse of PV
WattsOK? optimizes reuse/recycle decisions for used photovoltaic (PV) modules via automation, incl. optical inspection-based decision-AI, electrical measurements, and robotic PV connector exchange for reuse. With this, the project addresses the expected increase in used PV modules. The project aims to enhance efficiency and effectiveness of reuse/recycling decision processes, extending the lifetime of modules through reuse, reducing waste, and promoting a circular economy within the photovoltaic sector.
circPLAST‐mr Mechanical Recycling of Plastics: Mechanisches Recycling von Kunststoffen: From waste plastics to high‐quality and specification‐compliant recyclates
The flagship project circPLAST‐mr pursues the following 4 main objectives: (1) to identify and explore previously unused potential for mechanical plastics recycling, (2) to define and test key process steps for this on a laboratory/pilot scale, (3) to demonstrate the eco‐efficient marketability of increased recycled plastic volumes, and (4) to demonstrate the scalability of the laboratory/pilot process steps to industrial scale.
fERNkornSAN – decarbonization and renovation with renewable materials of the "Gründerzeit"-building Fernkorngasse 41
Using the example "Gründerzeitgebäude" in Fernkorngasse 41, 1100 Vienna, technical challenges and issues related to phasing out gas and oil as well as adapting to climate change are investigated. A particular focus is placed on the use or resource-efficient and ecological building materials and highly efficient technologies. The results should be the basis for the use for further projects.
rPS4FoodPackaging - Polystyrene Recycling for food contact applications
The production of recycled plastics for food contact applications is challenging. Besides recycled polyethylene terephthalate (rPET) for beverage bottles, there are few alternatives in recycled plastics. This project focuses on researching a novel recycling process for polystyrene, aiming for approval of recycled polystyrene (rPS) for food contact applications.